Bostitch SB-150SX Specifications

OPERATION and MAINTENANCE MANUALMANUAL DE OPERACIÓN Y DE MANTENIMIENTOMANUEL D’INSTRUCTIONS ET D’ENTRETIENFINISH TOOLSHERRAMIENTAS DE ACABADOOUTILS DE

TOOL OPERATION CHECK:CAUTION: Remove all fasteners from tool before performing tool operation check.1. TRIGGER OPERATED TOOL:A. With finger off the tr

-11-MAINTAINING THE PNEUMATIC TOOLWhen working on air tools, note the warnings in this manual and use extra care evaluating problem tools.CAUTION: Pu

Trigger valve housing leaks air O-ring cut or cracked . . . . . . . . . . . . . .Replace O-ringTrigger valve stem leaks air O-ring/seals cut or cr

The Fastener Control adjustment feature provides close control of the fastener drivedepth; from flush with the work surface to shallow or deep counte

-14-ACCESSORIES AVAILABLEBC602 1 pint Bostitch Air -Tool LubricantBC603 1 pint Bostitch “Winter-Formula” Air-Tool LubricantBC604 1 quart Bostitch Air

INTRODUCTIONThe Bostitch SB Series are precision-built tools, designed for high speed, high volume nailing and stapling. These tools will deliver eff

-3-SAFETY INSTRUCTIONSEYE PROTECTION which conforms to ANSI specifications and provides protectionagainst flying particles both from the FRONT and SID

-4-TOOL SPECIFICATIONSAll screws and nuts are metric.FASTENER SPECIFICATIONS:TOOL AIR FITTING:These tools use a free-flow connector plug, 1/4 N.P.T.

AIR SUPPLY AND CONNECTIONSDo not use oxygen, combustible gases, or bottled gases as a power source for this tool as tool may explode, possibly causing

-6-EYE PROTECTIONwhich conforms to ANSI specifications and provides protec-tion against flying particles both from the FRONT and SIDE should ALWAYS be

-7-EYE PROTECTION which conforms to ANSI specifications and provides protec-tion against flying particles both from the FRONT and SIDE should ALWAYS b

-8-EYE PROTECTION which conforms to ANSI specifications and provides protec-tion against flying particles both from the FRONT and SIDE should ALWAYS b

TOOL OPERATIONOPERATIONEYE PROTECTION which conforms to ANSI specifications and provides pro-tection against flying particles both from the FRONT and