Bostitch BTE820K User Manual download pdf (Page 7)

Assembly

WARNING:

To prevent accidental operation, turn off and unplug tool before

performing the following operations. Failure to do this could result in serious personal injury.

AUXILIARY HANDLE

WARNING:ThishandleSHOULDBEUSEDATALLTIMEStomaintaincomplete

control of the tool.

Anauxiliary3positionhandleisfurnishedwithyourgrinder.Itcanbescrewedinto

either side or the top of the gear case housing.

Accessories

It is important to choose the correct guards, backing pads and flanges to use with

grinderaccessories.Seepage9forinformationonchoosingthecorrectaccessories.

CAUTION: Accessories must be rated for at least the speed recom mended on the

tool WARNING label. Wheels and other accessories running over their rated

accessory speed may fly apart and cause injury. Threaded accessories must have a 5/8

inch-11hub.Everyunthreadedaccessorymusthavea7/8inch(22mm)arborhole.Ifit

does not, it may have been designed for a circular saw. Use only the accessories shown

onpage9ofthismanual.Accessoryratingsmustalwaysbeabovetoolspeedasshown

on tool nameplate.

MOUNTING GUARD (FIGURES B & C)

CAUTION: Guards must be used with all grinding wheels, sanding flap discs,

wire brushes cut-off wheels and wire wheels. The tool may be used without a guard

onlywhensandingwithconventionalsandingdiscs.TheBTE820isprovidedwithaguard

intendedforusewithdepressedcenterwheels(Type27)andhubbedgrindingwheels

(Type27).Thesameguardisdesignedforusewithsandingflapdiscs(Type27and29)

andwirecupbrushes.GrindingandcuttingwithwheelsotherthanType27and29require

different accessory guards. A Type 1 guard is provided for use with a Type 1 wheel.

Both Type 27 and Type 1 guards attach and are removed in the same way as

described below.

1. Figure B-Opentheguardlatch(7),andalignthe

lugsontheguard(8)withtheslotsonthegear

casecover(9).

 2.Pushtheguarddownuntiltheguardlugsengage

and rotate freely in the groove on the gear case

hub.

 3.Withtheguardlatchopen,rotatetheguardintothe

desired working position. The guard body should be

positioned between the spindle and the operator to

provide maximum operator protection.

FUNCTIONAL DESCRIPTION

1. Paddle switch

1a. Lock off lever

2. Cord

3. Toolfreeguard

4. Bodygrip

5. Auxiliaryhandle(3positions)

6. Spindlelockbutton

7.Guard(Type27orType1if

soequipped)(notshown)

1 2 3 4 5 6 7 8 9 10 11 12 ... 51 52

Comments to this Manuals

No comments

Bostitch BTE820K User Manual Page 7

Comments to this Manuals

Related products and manuals for Power tools Bostitch BTE820K