Bostitch BTE820K User Manual download pdf (Page 3)

f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection can

reduce dust-related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct power tool for your application. The correct

power tool will do the job better and safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or the battery pack from the power tool

before making any adjustments, changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar

with the power tool or these instructions to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of

parts and any other condition that may affect the power tool’s operation. If damaged,

have the power tool repaired before use. Many accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to control.

) Use the power tool, accessories and tool bits, etc. in accordance with these instructions,

taking into account the working conditions and the work to be performed. Use of the

power tool for operations different from those intended could result in a hazardous situation.

5) SERVICE

a) Have your power tool serviced by a qualified repair person using only identical

replacement parts. This will ensure that the safety of the power tool is maintained.

SAFETY INSTRUCTIONS FOR ALL OPERATIONS

SAFETY WARNINGS COMMON FOR GRINDING, SANDING,

WIRE BRUSHING OR ABRASIVE CUTTING-OFF OPERATIONS

a) This power tool is intended to function as a grinder, wire brush, sander or cut-

off tool. Read all safety warning instructions, illustrations and specifications

provided with this power tool. Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury. Operations such as polishing are

not recommended to be performed with this power tool. Operations for which the

power tool was not designed may create a hazard and cause personal injury.

b) Do not use accessories which are not specifically designed and

recommended by the tool manufacturer. Just because the accessory can be

attached to your power tool, it does not assure safe operation.

c) The rated speed of the accessory must be at least equal to the maximum

speed marked on the power tool. Accessories running faster than their rated

speed can break and fly apart.

d) The outside diameter and the thickness of your accessory must be within

the capacity rating of your power tool. Incorrectly sized accessories cannot be

adequately guarded or controlled.

e) The arbor size of wheels, flanges, backing pads or any other accessory must

properly fit the spindle of the power tool. Accessories with arbor holes that do

not match the mounting hardware of the power tool will run out of balance, vibrate

excessively and may cause loss of control.

f) Do not use a damaged accessory. Before each use inspect the accessory such

as abrasive wheel for chips and cracks, backing pad for cracks, tear or excess

wear, wire brush for loose or cracked wires. If power tool or accessory is dropped,

inspect for damage or install an undamaged accessory. After inspecting and

installing an accessory, position yourself and bystanders away from the plane of

the rotating accessory and run the power tool at maximum no-load speed for one

minute. Damaged accessories will normally break apart during this test time.

g) Wear personal protective equipment. Depending on application, use face

shield, safety goggles or safety glasses. As appropriate, wear dust mask,

hearing protectors, gloves and work shop apron capable of stopping small

abrasive or workpiece fragments. The eye protection must be capable of

1 2 3 4 5 6 7 8 ... 51 52

Comments to this Manuals

No comments

Bostitch BTE820K User Manual Page 3

Comments to this Manuals

Related products and manuals for Power tools Bostitch BTE820K